Commission XV : Design, Analysis and fabrication of welded structures (IIW 2017)

1) XV-1531-17 Fatigue Crack Analysis of T, k-type Tublar Member, KYONG-HO Chang (Korea)

2) XV-1540-17 Evaluation of welded pressure vessels for fire safety, SEBE Istvanm, JARMAI Karoly, BOKROS Istvan (Hungary)

3) XV-1541-17 Investigation of welded protective covers for heat treatment, JARMAI Karoly, SZUCS Renata (Hungary)

4) XV-1543-17 Guide for plasma cutting and holing, SHAW Robert(USA)

5) XV-1547-17 On Desigb of fillet welds made of UHSS, BJORK Timo (Finland)

Subcommission XV

1) XV-1530-17/XIII-2xxx-17 Annual Report 2016 of JWG XIII-XV Design and Analysis of Fatigue Loaded Welded Structures, HOBBACHER, Adolf (DE)

2) XV-1542-17 Annual Report 2016 of Subcommission XV-F Economy, JARMAI, Karoly (HU)

3) XV-1548-17 Annual Report 2016 of Subcommission XV-A Analysis, CHANG, Kyong Ho (KOR)

4) XV-1549-17 Annual Report 2015 of Subcommission XV-B Design, HAWKES, Doug (AUS)

5) XV-1551-17 Annual Report 2015 of Subcommission XV-D Planar Structures(Buildings and Bridges), AZUMA, Koji (JP), VERMA, Krishna (USA)

6) XV-1552-17 Annual Report 2016 of Subcommission XV-E Tubular Structures, UMMEHOFER, Thoma (DE)

7) XV-1533-17/XIII-2672-17 Annual Report 2016 on XIII-WG 3 and XV-A Activities Stress Analysis, FRICKE, Wolfgang(DE), CHANG, Kyong Ho (KOR)

8) XV-1550-17 Annual Report 2015 of Subcommission XV-C Fabrication, MOCHIZUKI, Masahito (JP)

Joint Meeting of Commissions X, XIII and XV

1) XIII-2699-17 Fatigue Strength Evaluation of Under-Matched Welded Joints made of 800MPa Class Steel based on the local Strain Approach, K. Kinoshita Japan)

2) XIII-2698-17 Fatigue Strength of Cruciform Joints and Longitudinal Joints with Laser-arc Hybrid Welding, T. Hanji et al (Japan)

3) XIII-2697-17 Effects of cut-out and rib sharpes on Fatigue of Orthotropic steel decks under vehicle loads, K. Yokozeki et al (Japan)

4) XIII-2683-17 Fatigue strength assessment of duplex and super-duplex strainless steels by 4R method, T. Bjork et al (Finland)

5)  XIII-2686-17 Fatigue Assessment of Welded Joints Contraining Process Relevant Imperfections, E. Javaheri et al (Iran)

6) XIII-2694-17 Influence of three-dimensional weld undercut geometry on fatigue-effective notch stress, S. Liinalampi et al (Finland)

7) X-1886-17/XIII-2689-17/XV-1544-17 Analytical treatment of stress concentration caused by buckling and angular distortions under remote loading conditions, DONG P., ZHU W., XING S. (UK)

8) X-1891-17/XIII-2693-17/XV-1546-17 Fatigue crack propagationa design curve for alumium alloys and their friction stir welded joints and the applicability of the curves on structural intergrity assessment calculations, LUKACS J., MEILINGER A., POSALAKY D. (Hungry)

9)  XIII-2690-17 Analysis of fatigue notch effects due to axial misalignment for ultrahigh-strength steel butt joints, M. Ottersbock et al (Australia)